Λεωφόρος Κύμης 114, 15122, Μαρούσι 210 88 35 300 digital7@satnet.gr
info 64 white
info 64 white

Καλοκαιρινές διακοπές

Η Ψηφιακή Τεχνολογία θα είναι ΚΛΕΙΣΤΗ από Δευτέρα 3 Αυγούστου 2026

έως και Παρασκευή 21 Αυγούστου 2026 λόγω καλοκαιρινών διακοπών.

info 64 white
info 64 white
Έφτασε ο νέος Δορυφορικός Δέκτης DigitalBox 8300 HD FTA

Κάντε κλικ εδώ για να παραγγείλετε

info 64 white
info 64 white
Έφτασε ο νέος επίγειος δέκτης Golden Media MANIA 828+

Κάντε κλικ εδώ για να παραγγείλετε

info 64 white
info 64 white
Νέοι πολυδιακόπτες DIGITALline από 5/8 ως 17/32 στις χαμηλότερες τιμές

Κάντε κλικ εδώ για να παραγγείλετε

Έκπτωση 15% σε κάμερες και καταγραφικά DAHUA
Unifiber™ Optical transmitter 1550nm (6111)
Κωδικός: IDLF-TX6OO1-W1550-OPR
Inverto

inverto logo black

Optical transmitter 1310nm, +6dBm with 2x Sat wideband (V+H) and DTT inputs

The Unifiber transmitter distributes satellite and terrestrial signals over a single fiber cable using a single 1550nm wavelength. At its inputs, it connects to the Vertical and Horizontal ports of a Unifiber wideband LNB (UK or EU models) and to DTT signals (FM/DAB/DTT) received through a Unifiber DTT processing unit. A built-in AGC makes sure whatever size of satellite dish antenna or DTT antenna is used, the input power level to the transmitter remains optimized to distribute high quality signal. The combined signal modulates an internal laser with an output power of +6dBm over a standard FC/UPC optical connector. The output signal can be distributed to a wide range of remote Unifiber optical receivers (dCSS/Quad/Quattro/Wideband) through a Passive Optical Network (PON) of Unifiber optical splitters or be amplified through a Unifiber EDFA optical amplifier to support wide scale FTTH (Fiber To The Home), FTTB (Fiber To The Block) or FTTF (Fiber To The Floor) installations.

6119 SP IDLF PRSOO2 DTTOO OPR dr
 
 
Main Features:
  • Optical output at 1550 nm supporting distribution through EDFAs
  • Supports Inverto's UK and EU wideband LNB models
  • Supports all FM, DAB and DTT broadcasts
  • Input level AGC (use any dish, no manual signal level adjustments required)
  • Optical budget of up to 21 dB
  • Quick and easy install, supporting FTTH, FTTB or FTTF deployment scenarios
  • For indoor installations, IP54

Technical specifications
RF inputs 3, F-Type (2x SAT wideband + 1 TERR)
Optical Output 1, FC/UPC
   
Satellite inputs  
Frequency range 290 ~ 2350 MHz
Input level range 70 ~ 90 dBuV (per transponder)
Input Return Loss 12 dB min. (75 ohm)
LNB power supply 10-20 VDC, 250mA max.
   
Terrestrial input  
Frequency range 87 ~ 240, 470 ~ 790 MHz
Input level range 83 ~ 93 dBuV
Input Return Loss 12 dB min. (75 ohm)
Terrestrial antenna power supply 10 ~ 20 VDC, 150mA max.
   
Optical output  
Output power +6 dBm
Wavelength 1550 nm
   
Satellite status LED Green = OK, RED = High input power, Yellow=Low input power
Blinking = laser failure
Terrestrial status LED Green = OK, RED = High input power, Yellow=Low input power
Blinking = DTT DC OUT overload
   
Power supply  
Voltage range 10 ~ 20 VDC
Power consumption (transmitter unit only) 4 W max.
Operating temperature range -20° ~ +40° C
Dimenssions 116 x 84 x 25.5 mm
Weight 280 g
 
Inverto Fiber solutions - Οπτικές ίνες ΟΠΤΙΚΕΣ ΙΝΕΣ - FIBER OPTICS

 Πατήστε εδώ για

ΠΡΟΣΦΟΡΕΣ